product description
High density PIR pipe support belongs to cold insulation system. In addition to good insulation performance, it shall bear loads from pipe/equipment.
For different use, ZES has different pipe support/block categories as below:
vSliding support
vGuide Support (including guide support for vertical pipe)
vLimit/fixing support
vInsulation block
Properties
(1) HDPIR properties:
The performance of cold insulation pipe support/block depends on the properties of HDPIR.
HDPIR is a kind of foaming polymer, with the features of plastic, rubber and cork. The raw materials are isocyanate, polyether, foaming agent, catalyst, flame retardant, etc. After high speed stirring, materials react and foam to cellular structure product, composed of millions of tiny and uniform sealed cells. It provide benefits of low density, low thermal conductivity, low water absorption. The performance is better than timber.
Physical Property | Unit | Technical Indicator | |||||
Avg. Density | kg/m3 | 160 | 224 | 320 | 400 | 500 | 550 |
Thermal Conductivity（20℃） | W/m.K | ≤0.032 | ≤0.040 | ≤0.050 | ≤0.058 | ≤0.075 | ≤0.085 |
Compressive Strength at Ambient Temperature | MPa | ≥2.0 | ≥4.0 | ≥7.0 | ≥12.0 | ≥18.0 | ≥22.0 |
Water Absorption by Vol | % | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.5 | ≤1.5 | ≤1.5 |
Closed Cell Content | % | ﹥95 | |||||
Linear Expansion Coefficient （-165～20℃） | 1/K | ≤65×10-6 | |||||
Service Temp. | ℃ | -196~+110 | |||||
(2) Auxiliary materials
ZES can provide the following auxiliary materials, such as vapor barrier, metal jacketing, rubber sheet, metal clip, bolt&nut, disc spring, insulating washer, PTFE sliding pair, vapor stop, in accordance with design requirements, to ensure the safety and reliability.
Product Application
It is mainly used in petrochemical industry, liquefied gas plant, refrigeration house and central air condition system, where high load bearing and insulation properties are required.
Packing and Storage
All parts will be fitted together in workshop. Finished product shall be wrapped by anti-ultraviolet polythene film, then packed in wooden case.
Application and Cautions
（1）Detach the product, install parts in positions, and fit them together again.
（2）Install according to manufacturer’s instruction,
